Bumper

show blocks helper
  • Out of stock

    ARIES Anti-Rattle D-Rings

    ARI2081300
    Designed for the ARIES TrailChaser Jeep bumper, these anti-rattle D-rings offer reliable strength for the serious off-road-style Jeep Wrangler JK. Their key feature is a rubber grommet built into each D-ring mounting bracket. This grommet is compressed when the D-ring is mounted into place, tightening and even restricting movement to eliminate vibrations. The integrated grommet also provides an additional convenience by allowing the D-ring to be held in the horizontal position, if needed, for better accessibility during use. ARIES anti-rattle D-rings include thick, strong backing plates and come with all necessary hardware for installation. Featuring a work load limit of 9,000 lbs., they can be used on the ARIES TrailChaser bumper or other front-end accessories (limited to the capacity of the mounting structure). Each D-ring is constructed from strong, forged steel and has a highly durable carbide black powder coat finish for long-lasting rust resistance on the trail. Each kit includes two D-rings., Limited lifetime warranty (three-year finish, one-year parts)
  • Out of stock
    The ARIES TrailChaser Jeep bumper is unlike any other bumper for the Jeep Wrangler because it features a modular design. Each piece can be attached or swapped out as desired, giving you complete freedom of customization. This particular package includes the rear corners only. These two corners are intended to be mounted on the TrailChaser rear bumper center section (sold separately). They offer a professional finishing touch with their integrated LED lights. The 2" square work lights put out 2,200 lumens each and feature a flood beam pattern. These side extensions are constructed from high-strength carbon steel and have a unique, textured black powder coat finish for maximum rust resistance. They are also available in powder-coated aluminum and without LED lights., TrailChaser Jeep Wrangler Rear Bumper Corners with LEDs
  • Out of stock
    The ARIES TrailChaser Jeep bumper is unlike any other bumper for the Jeep Wrangler because it features a modular design. Each piece can be attached or swapped out as desired, giving you complete freedom of customization. This particular package includes the rear corners only. These two corners are intended to be mounted on the TrailChaser rear bumper center section (sold separately). They offer a professional finishing touch with their integrated LED lights. The 2" square work lights put out 2,200 lumens each and feature a flood beam pattern. The side extensions are constructed from T6 aluminum alloy to be strong, lightweight and rust-free, and have a unique, textured black powder coat finish for maximum corrosion resistance. They are also available in powder-coated steel and without LED lights., Limited lifetime warranty (five-year finish, one-year parts)
  • Out of stock
    The ARIES TrailChaser Jeep bumper is unlike any other bumper for the Jeep Wrangler or Jeep Gladiator because it features a modular design. Each piece can be attached or swapped out as desired, giving you complete freedom of customization. This particular package includes the front-end corners only. These two corners are intended to be mounted on the TrailChaser front bumper center section (sold separately). They offer a professional finishing touch with their integrated, flush-mount LED lights. The 2" square work lights put out 2,200 lumens each and feature a flood beam pattern. They are made with grade-A LED chips, rust-free aluminum construction, an IP68-standard breather and dual heat sinks. They are also thoroughly tested and come with a waterproof wiring harness for easy installation. The corner end caps are constructed from high-strength carbon steel and have a unique, textured black powder coat finish for maximum rust resistance. They are also available in powder-coated aluminum and without LED lights., Limited lifetime warranty (three-year finish, one-year parts)
  • Out of stock
    The ARIES TrailChaser Jeep bumper is unlike any other bumper for the Jeep Wrangler or Jeep Gladiator because it features a modular design. Each piece can be attached or swapped out as desired, giving you complete freedom of customization. This particular package includes the front-end corners only. These two corners are intended to be mounted on the TrailChaser front bumper center section (sold separately). They offer a professional finishing touch with their integrated, flush-mount LED lights. The 2" square work lights put out 2,200 lumens each and feature a flood beam pattern. They are made with grade-A LED chips, rust-free aluminum construction, an IP68-standard breather and dual heat sinks. They are also thoroughly tested and come with a waterproof wiring harness for easy installation. The corner end caps are constructed from T6 aluminum alloy to be strong, lightweight and rust-free, and have a unique, textured black powder coat finish for maximum corrosion resistance. They are also available in powder-coated steel and without LED lights., Limited lifetime warranty (five-year finish, one-year parts)
  • Out of stock
    The ARIES TrailChaser Jeep bumper is unlike any other bumper for the Jeep Wrangler because it features a modular design. Each piece can be attached or swapped out as desired, giving you complete freedom of customization. This particular piece includes the front-end round center brush guard only and is intended to be mounted on the TrailChaser front bumper center section (sold separately). It features two welded tabs to mount an LED light bar or LED work lights and offers extra protection for the winch housing. This center brush guard is constructed from high-strength carbon steel and has a unique, textured black powder coat finish for maximum rust resistance. It is also available in powder-coated aluminum and in an angular design., Limited lifetime warranty (three-year finish, one-year parts)
  • Out of stock
    The ARIES TrailChaser Jeep bumper is unlike any other bumper for the Jeep Wrangler because it features a modular design. Each piece can be attached or swapped out as desired, giving you complete freedom of customization. This particular piece includes the front-end round center brush guard only and is intended to be mounted on the TrailChaser front bumper center section (sold separately). It features two welded tabs to mount an LED light bar or LED work lights and offers extra protection for the winch housing. This center brush guard is constructed from T6 aluminum alloy to be strong, lightweight and rust-free, and has a unique, textured black powder coat finish for maximum corrosion resistance. It is also available in powder-coated steel and in an angular design., Limited lifetime warranty (five-year finish, one-year parts)
  • Out of stock
    The ARIES TrailChaser Jeep bumper is unlike any other bumper for the Jeep Wrangler because it features a modular design. Each piece can be attached or swapped out as desired, giving you complete freedom of customization. This particular piece includes the front-end angular brush guard only and is intended to be mounted on the TrailChaser front bumper center section (sold separately). It not only adds an aggressive look to your Jeep, but it also helps protect the winch housing and provides additional mounting points for an LED light bar or LED work lights. It features a full-length, slotted channel along the center cross-member, allowing lights to be mounted on the top or bottom. This stinger-style brush guard is constructed from high-strength carbon steel and has a unique, textured black powder coat finish for maximum rust resistance. It is also available in powder-coated aluminum., Pre-formed slots readily accept LED lights on top or underneath JL Body Note - Will interfere with forward collision warning and adaptive cruise control systems
  • Out of stock
    The ARIES TrailChaser Jeep bumper is unlike any other bumper for the Jeep Wrangler because it features a modular design. Each piece can be attached or swapped out as desired, giving you complete freedom of customization. This particular piece includes the front-end angular brush guard only and is intended to be mounted on the TrailChaser front bumper center section (sold separately). It not only adds an aggressive look to your Jeep, but it also helps protect the winch housing and provides additional mounting points for an LED light bar or LED work lights. It features a full-length, slotted channel along the center cross-member, allowing lights to be mounted on the top or bottom. This stinger-style brush guard is constructed from T6 aluminum alloy to be strong, lightweight and rust-free, and has a unique, textured black powder coat finish for maximum corrosion resistance. It is also available in powder-coated steel., Limited lifetime warranty (five-year finish, one-year parts)
  • Out of stock
    The ARIES TrailChaser Jeep bumper is unlike any other bumper for the Jeep Wrangler JK because it features a modular design. With a variety of options to choose from, you can select the perfect configuration to match the style of your Jeep Wrangler. All TrailChaser bumpers are also compatible with a variety of accessories, including LED lights, D-rings, tow hooks and a winch. This particular TrailChaser bumper comes with a center section, angular center brush guard and corner end caps with flush-mount LED lights. It is constructed from high-strength carbon steel and has a unique, textured black powder coat finish for maximum rust resistance. This same configuration is also available in lightweight, rust-free, powder-coated aluminum. The bumper center section features a standard 22-1/2" x 7-3/4" winch housing and is compatible with the ARIES winch adapter #2072100 for larger winches. It provides cutouts for lights and has pre-drilled holes for D-rings #2081300 and tow hooks #15600TW. The bumper corners offer a professional finishing touch with their integrated, flush-mount LED lights. The 2" square work lights put out 2,200 lumens each and feature a flood beam pattern. They are made with grade-A LED chips, rust-free aluminum construction, an IP68-standard breather and dual heat sinks. They are also thoroughly tested and come with a waterproof wiring harness for easy installation. The stinger-style angular brush guard of this bumper not only adds an aggressive look to your Jeep JK, but it also features a slotted channel to mount additional LED lights. All ARIES TrailChaser bumpers install using pre-existing factory mounting points for fast, easy installation with no drilling required., Limited lifetime warranty (three-year finish, one-year parts)
  • Out of stock
    The ARIES TrailChaser Jeep bumper is unlike any other bumper for the Jeep Wrangler JK because it features a modular design. With a variety of options to choose from, you can select the perfect configuration to match the style of your Jeep Wrangler. All TrailChaser bumpers are also compatible with a variety of accessories, including LED lights, D-rings, tow hooks and a winch. This particular TrailChaser bumper comes with a center section, angular center brush guard and corner end caps with flush-mount LED lights. It is constructed from T6 aluminum alloy to be strong, lightweight and rust-free, and has a unique, textured black powder coat finish for maximum corrosion resistance. It is also available in high-strength, powder-coated steel. The bumper center section features a standard 22-1/2" x 7-3/4" winch housing and is compatible with the ARIES winch adapter #2072100 for larger winches. It provides cutouts for lights and has pre-drilled holes for D-rings #2081300 and tow hooks #15600TW. The bumper corners offer a professional finishing touch with their integrated, flush-mount LED lights. The 2" square work lights put out 2,200 lumens each and feature a flood beam pattern. They are made with grade-A LED chips, rust-free aluminum construction, an IP68-standard breather and dual heat sinks. They are also thoroughly tested and come with a waterproof wiring harness for easy installation. The stinger-style angular brush guard of this bumper not only adds an aggressive look to your Jeep JK, but it also features a slotted channel to mount additional LED lights. All ARIES TrailChaser bumpers install using pre-existing factory mounting points for fast, easy installation with no drilling required., Limited lifetime warranty (five-year finish, one-year parts)
  • Out of stock
    The ARIES TrailChaser Jeep bumper is unlike any other bumper for the Jeep Wrangler JL because it features a modular design. With a variety of options to choose from, you can select the perfect configuration to match the style of your Jeep Wrangler. All TrailChaser bumpers are also compatible with a variety of accessories, including LED lights, D-rings, tow hooks and a winch. This particular TrailChaser bumper comes with a center section, angular center brush guard and corner end caps with flush-mount LED lights. It is constructed from high-strength carbon steel and has a unique, textured black powder coat finish for maximum rust resistance. This same configuration is also available in lightweight, rust-free, powder-coated aluminum. The bumper center section features a standard 22-1/2" x 7-3/4" winch housing and is compatible with the ARIES winch adapter #2072100 for larger winches. It provides cutouts for lights and has pre-drilled holes for D-rings #2081300 and tow hooks #15600TW. The bumper corners offer a professional finishing touch with their integrated, flush-mount LED lights. The 2" square work lights put out 2,200 lumens each and feature a flood beam pattern. They are made with grade-A LED chips, rust-free aluminum construction, an IP68-standard breather and dual heat sinks. They are also thoroughly tested and come with a waterproof wiring harness for easy installation. The stinger-style angular brush guard of this bumper not only adds an aggressive look to your Jeep JL, but it also features a slotted channel to mount additional LED lights. All ARIES TrailChaser bumpers install using pre-existing factory mounting points for fast, easy installation with no drilling required., Modular pieces can be added or removed as desired to change the look any time JL Body Note - Will interfere with forward collision warning and adaptive cruise control systems