Description

The DECKED Tool Box is constructed using injection molded, high-impact resin with galvanized steel and aluminum reinforcement. Robust steel armored locking mechanism combined with driver side lock makes forced entry nearly impossible. Comes with (2) keys. It’s molded not welded, so you get a seamless lid and tub as well as overbuilt, moisture repelling, watertight architecture. Seals tightly when closed with an EPDM gasket. Anti-corrosion treated steel and aluminum hardware make for long-lasting durability. This clever, 6000 series aluminum step ladder easily deploys so you can actually reach your tools and gear. The ladder takes up minimal space, efficiently folding closed inside the box. Features: Effortless lid opening and closing. No slamming of fingers. (2) tie-downs at base of tub for securing a moto/ATV or large cargo. Seamless, watertight construction. EPDM lid gasket. Steel armored locking mechanism combined with driver side lock. Comes with (2) keys. Blue D-Box included with Tool Box. Hangers inside tub to hold in place. Tray for small tools & gear. Included with Tool Box. Tray for small tools & gear. Included with Tool Box. Ladder Not Included (PN# TBFSLADDER)

The DECKED Tool Box is NOT compatible with all DECKED Drawer Systems. The Drawer System is only compatible with the Tool Box for select 8′ trucks, the drawers are not compatible with the Tool Box for any short 5’6″ or standard 6’6″ bed length trucks. COMPATIBILITY WITH A GOOSENECK OR FIFTH WHEEL: It is critical that any Gooseneck or Fifth Wheel has enough clearance to accommodate the DECKED Tool Box. The Tool Box is 6″ in height above the bedrails and takes up 24″ in bed depth between the cabside bed wall and the edge of the Tool Box. NOTE: If your trailer swings wide while turning, make sure there is extra clearance as needed to avoid hitting the Tool Box on a tight turn. DUAL REAR WHEEL TRUCKS: If you have a dually fender, the Tool Box is compatible, but the access ladder may or may not be compatible. If the measurement from the cab to the start of the dually fender is 24″ or less, the ladder won’t have room to deploy properly. ALL TOOL BOXES COME STANDARD WITH THE FOLLOWING: Set of (2) keys for drivers side lock, (1) Blue DECKED D-Box, and (1) Snack Tray included at no extra charge. The Tool Box with the integrated Access Ladder fits one nested D-Box and one Snack Tray. Without the Access Ladder, it will fit 2 of each. Fits up to 3 Crossboxes at the bottom of the tub. Additional accessories ship for free, so order up! NOTE: The DECKED Tool Box will most likely be compatible if your bed width is between 61.375″ and 70.5″ inside bedrail to inside bedrail (this should be the measurement from the left inside bed rail to the right inside bed rail). If you are unsure if the DECKED Tool Box will fit in your truck, call us before placing an order so we can confirm.