-
The DECKED Tool Box is constructed using injection molded, high-impact resin with galvanized steel and aluminum reinforcement. Robust steel armored locking mechanism combined with driver side lock makes forced entry nearly impossible. Comes with (2) keys. It's molded not welded, so you get a seamless lid and tub as well as overbuilt, moisture repelling, watertight architecture. Seals tightly when closed with an EPDM gasket. Anti-corrosion treated steel and aluminum hardware make for long-lasting durability. This clever, 6000 series aluminum step ladder easily deploys so you can actually reach your tools and gear. The ladder takes up minimal space, efficiently folding closed inside the box. Features: Effortless lid opening and closing. No slamming of fingers. (2) tie-downs at base of tub for securing a moto/ATV or large cargo. Seamless, watertight construction. EPDM lid gasket. Steel armored locking mechanism combined with driver side lock. Comes with (2) keys. Blue D-Box included with Tool Box. Hangers inside tub to hold in place. Tray for small tools & gear. Included with Tool Box. Tray for small tools & gear. Included with Tool Box. Ladder Not Included (PN# TBFSLADDER), The DECKED Tool Box is NOT compatible with all DECKED Drawer Systems. The Drawer System is only compatible with the Tool Box for select 8' trucks, the drawers are not compatible with the Tool Box for any short 5'6" or standard 6'6" bed length trucks. COMPATIBILITY WITH A GOOSENECK OR FIFTH WHEEL: It is critical that any Gooseneck or Fifth Wheel has enough clearance to accommodate the DECKED Tool Box. The Tool Box is 6" in height above the bedrails and takes up 24" in bed depth between the cabside bed wall and the edge of the Tool Box. NOTE: If your trailer swings wide while turning, make sure there is extra clearance as needed to avoid hitting the Tool Box on a tight turn. DUAL REAR WHEEL TRUCKS: If you have a dually fender, the Tool Box is compatible, but the access ladder may or may not be compatible. If the measurement from the cab to the start of the dually fender is 24" or less, the ladder won't have room to deploy properly. ALL TOOL BOXES COME STANDARD WITH THE FOLLOWING: Set of (2) keys for drivers side lock, (1) Blue DECKED D-Box, and (1) Snack Tray included at no extra charge. The Tool Box with the integrated Access Ladder fits one nested D-Box and one Snack Tray. Without the Access Ladder, it will fit 2 of each. Fits up to 3 Crossboxes at the bottom of the tub. Additional accessories ship for free, so order up! NOTE: The DECKED Tool Box will most likely be compatible if your bed width is between 61.375" and 70.5" inside bedrail to inside bedrail (this should be the measurement from the left inside bed rail to the right inside bed rail). If you are unsure if the DECKED Tool Box will fit in your truck, call us before placing an order so we can confirm. 
The DECKED Tool Box is constructed using injection molded, high-impact resin with galvanized steel and aluminum reinforcement. Robust steel armored locking mechanism combined with driver side lock makes forced entry nearly impossible. Comes with (2) keys. It's molded not welded, so you get a seamless lid and tub as well as overbuilt, moisture repelling, watertight architecture. Seals tightly when closed with an EPDM gasket. Anti-corrosion treated steel and aluminum hardware make for long-lasting durability. This clever, 6000 series aluminum step ladder easily deploys so you can actually reach your tools and gear. The ladder takes up minimal space, efficiently folding closed inside the box. Features: Effortless lid opening and closing. No slamming of fingers. (2) tie-downs at base of tub for securing a moto/ATV or large cargo. Seamless, watertight construction. EPDM lid gasket. Steel armored locking mechanism combined with driver side lock. Comes with (2) keys. Blue D-Box included with Tool Box. Hangers inside tub to hold in place. Tray for small tools & gear. Included with Tool Box. Tray for small tools & gear. Included with Tool Box. Ladder Included., The DECKED Tool Box is NOT compatible with any DECKED Drawer Systems. The Drawer System is only compatible with the Tool Box for select 8' trucks, the drawers are not compatible with the Tool Box for any short 5'6" or standard 6'6" bed length trucks. COMPATIBILITY WITH A GOOSENECK OR FIFTH WHEEL: It is critical that any Gooseneck or Fifth Wheel has enough clearance to accommodate the DECKED Tool Box. The Tool Box is 6" in height above the bedrails and takes up 24" in bed depth between the cabside bed wall and the edge of the Tool Box. NOTE: If your trailer swings wide while turning, make sure there is extra clearance as needed to avoid hitting the Tool Box on a tight turn. DUAL REAR WHEEL TRUCKS: If you have a dually fender, the Tool Box is compatible, but the access ladder may or may not be compatible. If the measurement from the cab to the start of the dually fender is 24" or less, the ladder won't have room to deploy properly. ALL TOOL BOXES COME STANDARD WITH THE FOLLOWING: Set of (2) keys for drivers side lock, (1) Blue DECKED D-Box, and (1) Snack Tray included at no extra charge. The Tool Box with the integrated Access Ladder fits one nested D-Box and one Snack Tray. Without the Access Ladder, it will fit 2 of each. Fits up to 3 Crossboxes at the bottom of the tub. Additional accessories ship for free, so order up! NOTE: The DECKED Tool Box will most likely be compatible if your bed width is between 61.375" and 70.5" inside bedrail to inside bedrail (this should be the measurement from the left inside bed rail to the right inside bed rail). If you are unsure if the DECKED Tool Box will fit in your truck, call us before placing an order so we can confirm.
Built for everyday use and abuse, Eagle Manufacturing Aluminum Tool Boxes keep equipment safe and dry. With great features including a reinforced done lid, seal-tight weather-proof gasket, adjustable strikers, and heavy-duty aluminum hinge for extra strength and durability. 1 Year Manufacturing Warranty., Standard Lid Crossover Aluminum Tool Box; Brite Diamond Plate; Dimensions: 70.50 x 20.50 x 14.25 / 08.75 x 59.75 x 17.75
Built for everyday use and abuse, Eagle Manufacturing Aluminum Tool Boxes keep equipment safe and dry. With great features including a reinforced done lid, seal-tight weather-proof gasket, adjustable strikers, and heavy-duty aluminum hinge for extra strength and durability. 1 Year Manufacturing Warranty., Flush Mount Aluminum Tool Box; Brite Diamond Plate; Dimensions: 56 x 18.5 x 20.5
Built for everyday use and abuse, Eagle Manufacturing Aluminum Tool Boxes keep equipment safe and dry. With great features including a reinforced done lid, seal-tight weather-proof gasket, adjustable strikers, and heavy-duty aluminum hinge for extra strength and durability. 1 Year Manufacturing Warranty., Gull Wing Crossover Aluminum Tool Box; Brite Diamond Plate; Dimensions: 70.50 x 20.50 x 14.00 / 08.75 x 61.50 x 18Out of stock
All New Eagle Manufacturing Aluminum Truck Tool Boxes - Angle Crossover - 1-Year Limited Lifetime Warranty., Built for everyday use and abuse. Theses boxes keep equipment and tools safe and dry with a reinforced dome lid, a seal-tight, weather-proof gasket, adjustable strikers, and heavy-duty aluminum hinge for extra strength and durability.
UWS drawer truck tool boxes provide unbeatable storage and security for your small tools and equipment in your truck, van, trailer or even on a workbench. Each box features five sliding drawers, a corrosion-resistant aluminum construction and a highly secure stainless steel locking system - all to keep your equipment and valuables safe and easily accessible whenever needed. The tool box itself is constructed from extra-thick aluminum for increased structural strength. The tub is welded together into a single piece for weather resistance, and the door features a stainless steel, key-operated T-handle. Stainless steel construction supplies the lock with long-lasting corrosion resistance, and the door also has a MicroSeal gasket, blocking moisture, dust and insects from getting inside and damaging your valuables. The drawers of this tool box are constructed from commercial-grade, precision-injected plastic for strength and smooth operation. They slide on stainless steel ball bearings and sliders for excellent corrosion resistance. UWS drawer tool boxes are available in multiple sizes to accommodate any storage need. Like all UWS tool boxes, this product is proudly assembled right here in the USA for style and long-lasting dependability., Limited Lifetime Warranty (One-Year Finish; One-Year Parts); UWS DS-18-BLK Drawer Truck Tool Box with 5 Sliding Drawers (18 Inch-Gloss Black Powder-Coated Aluminum);
UWS drawer truck tool boxes provide unbeatable storage and security for your small tools and equipment in your truck, van, trailer or even on a workbench. Each box features five sliding drawers, a corrosion-resistant aluminum construction and a highly secure stainless steel locking system - all to keep your equipment and valuables safe and easily accessible whenever needed. The tool box itself is constructed from extra-thick aluminum for increased structural strength. The tub is welded together into a single piece for weather resistance, and the door features a stainless steel, key-operated T-handle. Stainless steel construction supplies the lock with long-lasting corrosion resistance, and the door also has a MicroSeal gasket, blocking moisture, dust and insects from getting inside and damaging your valuables. The drawers of this tool box are constructed from commercial-grade, precision-injected plastic for strength and smooth operation. They slide on stainless steel ball bearings and sliders for excellent corrosion resistance. UWS drawer tool boxes are available in multiple sizes to accommodate any storage need. Like all UWS tool boxes, this product is proudly assembled right here in the USA for style and long-lasting dependability., Limited Lifetime Warranty (One-Year Finish; One-Year Parts); UWS DS-18 Drawer Truck Tool Box with 5 Sliding Drawers (18 Inch-Bright Aluminum);
UWS drawer truck tool boxes provide unbeatable storage and security for your small tools and equipment in your truck, van, trailer or even on a workbench. Each box features five sliding drawers, a corrosion-resistant aluminum construction and a highly secure stainless steel locking system - all to keep your equipment and valuables safe and easily accessible whenever needed. The tool box itself is constructed from extra-thick aluminum for increased structural strength. The tub is welded together into a single piece for weather resistance, and the door features a stainless steel, key-operated T-handle. Stainless steel construction supplies the lock with long-lasting corrosion resistance, and the door also has a MicroSeal gasket, blocking moisture, dust and insects from getting inside and damaging your valuables. The drawers of this tool box are constructed from commercial-grade, precision-injected plastic for strength and smooth operation. They slide on stainless steel ball bearings and sliders for excellent corrosion resistance. UWS drawer tool boxes are available in multiple sizes to accommodate any storage need. Like all UWS tool boxes, this product is proudly assembled right here in the USA for style and long-lasting dependability., UWS DS-22 Drawer Truck Tool Box with 5 Sliding Drawers (22 Inch-Bright Aluminum);
UWS underbody tool boxes provide unbeatable storage and security for your items under the bed of your truck or trailer. The box conveniently mounts underneath the bed of a flatbed truck, dump truck or trailer, leaving more space on top of the bed for other cargo. Each box features a corrosion-resistant aluminum construction, heavy-duty aircraft cable door supports and a highly secure stainless steel locking system - all to keep your equipment and valuables safe and easily accessible whenever needed. Each UWS underbody tool box is constructed from extra-thick aluminum for increased structural strength. The tub is welded together into a single piece for weather resistance and to easily hold heavy tools and other items. The door features aircraft-grade stainless steel cables, rated to support up to 1.000 lbs., ensuring reliable strength and door operation. The locking mechanism of this underbody truck tool box provides excellent security for your items, featuring a stainless steel, key-operated T-handle. Stainless steel construction supplies the lock with long-lasting corrosion resistance, and the door also has a MicroSeal gasket, blocking moisture, dust and insects from getting inside and damaging your valuables. The door also opens a full 90 degrees for easier access. UWS truck tool boxes are available in multiple sizes to accommodate any storage need. Like all UWS products, each one is proudly assembled right here in the USA for style and long-lasting dependability., UWS TBUB-24 Small Underbody Tool Box (24 Inch Single-Door Side Mount Truck Tool Box-Bright Aluminum;
UWS underbody tool boxes provide unbeatable storage and security for your items under the bed of your truck or trailer. The box conveniently mounts underneath the bed of a flatbed truck, dump truck or trailer, leaving more space on top of the bed for other cargo. Each box features a corrosion-resistant aluminum construction, heavy-duty aircraft cable door supports and a highly secure stainless steel locking system - all to keep your equipment and valuables safe and easily accessible whenever needed. Each UWS underbody tool box is constructed from extra-thick aluminum for increased structural strength. The tub is welded together into a single piece for weather resistance and to easily hold heavy tools and other items. The door features aircraft-grade stainless steel cables, rated to support up to 1.000 lbs., ensuring reliable strength and door operation. The locking mechanism of this underbody truck tool box provides excellent security for your items, featuring a stainless steel, key-operated T-handle. Stainless steel construction supplies the lock with long-lasting corrosion resistance, and the door also has a MicroSeal gasket, blocking moisture, dust and insects from getting inside and damaging your valuables. The door also opens a full 90 degrees for easier access. UWS truck tool boxes are available in multiple sizes to accommodate any storage need. Like all UWS products, each one is proudly assembled right here in the USA for style and long-lasting dependability., UWS TBUB-30 Small Underbody Tool Box (30 Inch Single-Door Side Mount Truck Tool Box-Bright Aluminum;Title
Quick Links
Get Social
© 2024 Accessory Warehouse | All Rights Reserved
